Power range: 30W ~ 1KW
Voltage range: 1KV ~ 60KV
Current range: 1mA ~ 1A
2U / 19-inch standard chassis
Precise voltage and current setting and measurement capabilities
OVP, OCP, short circuit and load discharging protections etc.
The LTP series laboratory high-voltage power supply is a high-voltage power supply specially designed for high-voltage laboratory applications. It adopts a 19-inch 2U standard chassis with a designed output power of 1KW and an output voltage range of 1KV to 60KV.
The LTP series high-voltage laboratory power supply is a constant-voltage and constant-current controlled high-voltage power supply. The output voltage and current can be continuously adjusted from 0 to the rated value through the control potentiometer on the front panel, and the output display is through high-resolution KV and mA LEDs. The power supply is also equipped with a DB9 interface as standard, and 0-10V signals and dry contact signals can applied to the interface to achieve control and monitoring of the power supply.
The high-voltage laboratory power supply has high precision, high stability and low ripple output characteristics. The stability and ripple can reach the level of 0.1%. At the same time, the power supply is equipped with complete protection functions to deal with sparks, short circuits, overloads, and loads discharging conditions.
At present, the high-voltage laboratory power supplies are mainly used for laboratory high-voltage test benches, electrostatics, insulation testing and electrophoresis applications.
CV / CC working modes.
Output voltage & current adjustable from 0 to 100%
Stable & Low ripple HV output.
4-digit LED digital meters display.
Perfect & Complete protection functions
Compact structure, small size and light weight.
0~10V analog signal control (standard DB interface) (+AC)
RS communication interface (RS232 / RS485 optional) (+RC)
1.This power module has HV output, only professional person could operate it.
2.Please check power module as below before start-up.
(1)Keep power module clean and good ventilation.
(2)HV input & output connectors or HV load no touch anything.
(3)Please check back current of load well connected with GND bolt at the back of power module.
